रास्पबेरी 8GB रैम लिनक्स डेवलपमेंट बोर्ड
प्रस्तुति
Do you have a retro gaming project and want to use a Raspberry Pi5 to play classic video games?
The Raspberry Pi is the most affordable solution for this type of project. In this guide, we’ll detail the essential components needed to build your gaming system, whether it’s installed in a bartop, a mini arcade cabinet, or a full upright arcade machine.
LIST OF REQUIRED HARDWARE
The Raspberry Pi5
The Raspberry Pi5 is available in several versions.
We offer 2GB, 4GB, and 8GB models.
For retro gaming use, the 2GB and 4GB versions are more than sufficient. However, if you want extra memory, the 8GB version is also available.
2GB Version: https://www.smallcab.net/raspberry-pi5-2Go-p-3104.html 4GB Version: https://www.smallcab.net/raspberry-pi5-4go-p-2971.html 8GB Version: https://www.smallcab.net/raspberry-pi5-8Go-p-2972.html
बिजली की आपूर्ति
To operate properly, the Raspberry Pi requires a 5V 3A power supply with a USB-C connector. It is essential to use a power supply that delivers at least 3A. Using a lower-rated power supply may cause the Raspberry Pi to fail to start or to reboot unexpectedly during use.
हम दो विकल्प प्रदान करते हैं:
- Official Power Supply 5V – USB-C – Pi 5 – 27W https://www.smallcab.net/alimentation-p-2973.html
This official power supply allows you to fully utilize the capabilities of your Raspberry Pi5. - Inside your arcade cabinet, mini cabinet, or bartop, you can also install a power strip unit: https://www.smallcab.net/bloc-multiprise-rackable-p-1801.html
- This power strip has the advantage of being mountable onto your wooden structure.
- It will allow you to connect the power supplies for the Raspberry Pi, the audio ampलाईफायर, एलईडी पट्टी, और स्क्रीन।
Connecting to the screen
To connect the Raspberry Pi5’s micro-HDMI video output to a screen, you have three options: 1/ Use a Micro HDMI Cable
This is the simplest solution to connect your Raspberry Pi5 directly to your screen. https://www.smallcab.net/cable-micro-hdmi-hdmi-male-male-p-2385.html
2/ Use a Micro HDMI to HDMI Adapter
This is an alternative solution that allows you to use a standard male-to-male HDMI cable you might already own. https://www.smallcab.net/adaptateur-micro-hdmi-vers-hdmi-raspberry-p-2337.html
And if you don’t have an HDMI cable: 50 cm HDMI Cable: https://www.smallcab.net/cable-hdmi-male-male-plaqu-p-1691.html 150 cm HDMI Cable: https://www.smallcab.net/cable-hdmi-ultra-p-1686.html
3/ Use a Micro HDMI to VGA Converter https://www.smallcab.net/convertisseur-micro-hdmi-vers-pour-raspberry-p-2393.html
- If your screen only has a VGA input, this adapter is the solution for you.
- You will connect it between your Raspberry Pi5 and your screen using a VGA cable.
- To connect the micro HDMI to VGA adapter to your screen, you’ll need a VGA cable. We offer a 1.4m VGA cable: https://www.smallcab.net/cable-vga-p-439.html
अच्छा पत्रक
The Raspberry Pi5 has the particularity of not having a built-in sound card.
You will need an external USB sound card. https://www.smallcab.net/carte-externe-raspberry-p-3160.html
ऑडियो ampजीवन भर
हम कई प्रकार के ऑडियो प्रदान करते हैं ampलाइफ़ियर्स, जिनमें निम्नलिखित शामिल हैं:
मिनी स्टीरियो ऑडियो ampजीवन भर https://www.smallcab.net/mini-amplificateur-audio-stereo-p-565.html
यह ऑडियो ampलिफायर के पास एडवान हैtagकॉम्पैक्ट होने के कारण, इसे 12V/2A पावर सप्लाई की आवश्यकता होती है। अगर आपने टर्मिनल ब्लॉक पावर सप्लाई चुनी है, तो आप इसे कनेक्ट कर सकते हैं। amplifier to it. You will need a second jack cable: https://www.smallcab.net/cable-alimentation-jack-p-1721.html
Otherwise, you will need to acquire a separate 12V/3A jack power supply.
स्टीरियो ऑडियो ampजीवन भर https://www.smallcab.net/amplificateur-audio-stereo-lepy-p-1355.html- यह ऑडियो amplifier requires a 12V/3A power supply.
- If you’ve chosen a terminal block power supply, you can connect this amplifier to it. You will need a second jack cable: https://www.smallcab.net/cable-alimentation-jack-p-1721.html
- Otherwise, you will need to acquire a separate 12V/3A jack power supply.
वक्ता
अनेक amplifier/speaker combinations are possible. However, we particularly recommend this versatile model: 10cm Speaker – 8ohms 20W
2 एक्स https://www.smallcab.net/haut-parleur-p-1330.html
You will need two speakers to enjoy stereo sound.
Speaker audio cable
Between 15 and 20 x https://www.smallcab.net/cable-audio-haut-parleur-p-1353.html The cable is sold in 10 cm increments. You will need between 1.5m (quantity 15) and 2m (quantity 20) of cable to connect your speakers to your audio amplifier. However, make sure to check the appropriate length for your project.
कनेक्टर्स
- 2 एक्स https://www.smallcab.net/cosse-28mm-p-907.html
- 2 एक्स https://www.smallcab.net/cosse-48mm-p-626.html
- To connect the speakers to the speaker cable, you can either solder the wires or crimp a 2.8mm insulated connector onto the smaller (-) terminal and a 4.8mm insulated connector onto the larger (+) terminal.
Joystick and button kits
हम रास्पबेरी पाई सेटअप के लिए विशेष रूप से डिज़ाइन किए गए जॉयस्टिक/बटन किट की एक श्रृंखला प्रदान करते हैं। कुछ में मानक बटन होते हैं, जबकि अन्य में प्रबुद्ध बटन होते हैं। हमारी किट में आपकी ज़रूरतों के सभी ज़रूरी घटक शामिल हैं। आप अलग-अलग उत्पाद खरीदकर अपनी खुद की कस्टम किट भी बना सकते हैं।
All Raspberry Pi kits are built in the same way:
- जॉयस्टिक्स
- Short shaft option (suitable for metal joystick mounts).
- Long shaft option (suitable for wooden joystick mounts). Since most bartop/mini arcade or arcade kits on the market use wooden joystick/button mounts, you will need to choose the long shaft option.
- In terms of quality/reputation, we offer the following joysticks:
- Sanwa Joysticks: High-quality Japanese joysticks, very smooth.
- Seimitsu Joysticks: High-quality Japanese joysticks, very versatile.
- Industrias Lorenzo Pear or Handle Joysticks: Spanish joysticks, firmer than Japanese ones.
- Standard Joysticks: An economical choice.
- बटन
- For each player, we offer six buttons, plus a start button and a service button. Additionally, we include a Hot Key (HK) button, which allows you to exit an emulator and return to the selection menu.
- Joystick/Button Connection System to the Raspberry Pi
By default, we offer wiring for the GPIO port. Unfortunately, this solution is no longer functional on the Raspberry Pi5, so you will need to select the “GPIO wiring with USB cable and Xin-mo PCB” option.
This two-player USB interface is compatible with RecalBox and Batocera distributions.
THE DISTRIBUTION
वितरण आवश्यक है क्योंकि यह आपके रेट्रो गेमिंग सिस्टम का इंजन है। Raspberry Pi5 के लिए कई वितरण उपलब्ध हैं।
- RecalBox
The RecalBox distribution is very dynamic and offers support in French. https://www.recalbox.com/fr/download/stable/rpi/rpi5_64/
It also has a YouTube channel with many tutorials. https://www.youtube.com/channel/UCfcqrtnHwB84YQlVN75PRfQ
खिलाड़ी 1 और 2 के लिए जॉयस्टिक/बटन वायरिंग USB नियंत्रक बोर्ड के माध्यम से की जानी चाहिए। - बैटोसेरा
https://batocera.org/download
खिलाड़ी 1 और 2 के लिए जॉयस्टिक/बटन वायरिंग USB नियंत्रक बोर्ड के माध्यम से की जानी चाहिए। - LAKKA
An alternative to the other distributions, a Raspberry Pi5 version is available: https://www.lakka.tv/get/linux/rpi/
वायरिंग
Xinmotek USB Interface
The wiring diagram is provided as a reference.
The configuration interface will allow you to assign specific functions to each button (A, B, X, Y, etc.).
सामान्य प्रश्न:
- Q: Which power supply is recommended for the Raspberry Pi5?
A: A 5V 3A power supply with a USB-C connector is recommended to ensure proper operation of the Raspberry Pi5.
प्रश्न: रास्पबेरी Pi5 के उपलब्ध मॉडल कौन से हैं?
A: The Raspberry Pi5 is available in 2GB, 4GB, and 8GB versions, suitable for various applications including retro gaming projects.
दस्तावेज़ / संसाधन
 |
रास्पबेरी 8GB रैम लिनक्स डेवलपमेंट बोर्ड [पीडीएफ] उपयोगकर्ता गाइड 2GB, 4GB, 8GB, 8GB रैम लिनक्स डेवलपमेंट बोर्ड, रैम लिनक्स डेवलपमेंट बोर्ड, डेवलपमेंट बोर्ड, बोर्ड |