SwellPro FD3 Fisherman Drone User Manual

1 परिचय

This manual provides essential instructions for the safe operation, setup, and maintenance of your SwellPro FD3 Fisherman Waterproof Fishing Drone. The FD3 is designed for marine environments, featuring IP67 waterproofing, a 4K camera, and a dual bait release mechanism for fishing applications. Please read this manual thoroughly before operating the drone to ensure proper use and to prevent damage or injury.

सुरक्षा के लिए दिशा - निर्देश

• ड्रोन को हमेशा खुले क्षेत्रों में, लोगों, जानवरों और बाधाओं से दूर रखें।
• संचालन के दौरान ड्रोन से सुरक्षित दूरी बनाए रखें।
• Do not operate the drone in strong winds, heavy rain, or lightning.
• Ensure all batteries are fully charged before each flight.
• Regularly inspect the drone for any damage before and after use.
• ड्रोन संचालन से संबंधित सभी स्थानीय नियमों और कानूनों का पालन करें।

2. पैकेज सामग्री

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact SwellPro support.

चित्र 2.1: The SwellPro FD3 Fisherman drone shown with its primary accessories, including the remote control, flight battery, charger, and bait release mechanism.

• SwellPro FD3 Fisherman Drone (x1)
• रिमोट कंट्रोलर (x1)
• Intelligent Flight Battery (x1)
• बैटरी चार्जर (x1)
• Propellers (sets)
• Dual Bait Release Mechanism (x1)
• उपयोगकर्ता मैनुअल (यह दस्तावेज़)
• Other accessories (e.g., cables, tools)

3. सेटअप

3.1 ड्रोन असेंबली

1. प्रोपेलर संलग्न करें: Carefully attach the propellers to the motor shafts. Ensure correct propeller type (CW/CCW) matches the corresponding motor. Tighten securely.
2. फ्लाइट बैटरी स्थापित करें: Insert the intelligent flight battery into the drone's battery compartment until it clicks into place.
3. Attach Bait Release Mechanism: Secure the dual bait release mechanism to the drone's underside according to the provided diagrams. Ensure it is firmly attached and cables are connected.
4. कैमरा स्थापित करें: Mount the 4K camera onto its designated gimbal or mounting point, ensuring all connections are secure.

चित्र 3.1: ऊपर से नीचे view of the SwellPro FD3 drone, illustrating the propeller and motor configuration. Ensure propellers are correctly installed for safe flight.

3.2 बैटरी चार्जिंग

Charge both the intelligent flight battery and the remote controller battery before first use and after each flight.

• बैटरी चार्जर को पावर आउटलेट से कनेक्ट करें।
• Connect the flight battery to the charger. The indicator light will show charging status.
• Connect the remote controller to its charger (usually via USB).
• Charge until all indicator lights show a full charge.

3.3 रिमोट कंट्रोल सेटअप

चित्र 3.2: The SwellPro FD3 drone positioned next to its remote control, which features a built-in display for real-time flight data and camera feed.

Power on the remote controller. If it does not automatically connect to the drone, follow the binding procedure outlined in the quick start guide or the full manual (if available separately) to establish a connection.

3.4 ऐप इंस्टॉलेशन (वैकल्पिक)

For advanced features and real-time telemetry, download the official SwellPro app from your device's app store. Follow the in-app instructions to connect your drone and remote controller.

4. ड्रोन का संचालन

4.1 उड़ान-पूर्व चेकलिस्ट

• सुनिश्चित करें कि सभी बैटरियां (ड्रोन और रिमोट) पूरी तरह से चार्ज हों।
• Check propellers for damage and ensure they are securely attached.
• Verify the bait release mechanism and camera are properly installed.
• Check the weather conditions (wind speed, rain).
• Ensure sufficient GPS signal (if operating in GPS mode).
• Clear the flight area of any obstacles, people, or animals.

चित्र 4.1: The SwellPro FD3 drone in flight over water, demonstrating its waterproof capabilities. Always perform a pre-flight check before launching.

4.2 बुनियादी उड़ान नियंत्रण

Refer to the remote controller diagram (usually found in the quick start guide) for specific stick and button functions. Common controls include:

• बायीं डंडी: Throttle (up/down), Yaw (rotate left/right)
• सही लकड़ी: Pitch (forward/backward), Roll (left/right)
• होम पेज पर वापस जाने का बटन (RTH): Initiates automatic return to the takeoff point.
• Bait Release Button: Activates the bait release mechanism.
• कैमरा नियंत्रण: Buttons for photo capture and video recording.

4.3 Bait Release Operation

1. Securely attach your fishing line with bait to the dual bait release mechanism. Ensure the weight does not exceed the drone's maximum payload capacity (4.4 lbs).
2. Fly the drone to your desired casting location.
3. Once in position, press the dedicated bait release button on the remote controller. The mechanism will open, dropping the bait.
4. Confirm the bait has been released via the camera feed or visual observation.

4.4 4K Camera Operation

• Ensure a compatible microSD card is inserted into the camera.
• Use the dedicated buttons on the remote controller to start/stop video recording or take photos.
• The live video feed will be displayed on the remote controller's screen or connected mobile device.

4.5 Auto Drop & Return

The FD3 features intelligent flight functions:

• Auto Drop: This refers to the automated bait release function, triggered by the remote controller.
• घर वापसी (आरटीएच): When activated, the drone will automatically fly back to its recorded takeoff point and land. This feature is also triggered automatically if the battery level is critically low or if the control signal is lost.

5. रखरखाव

5.1 सफाई

• After use, especially in saltwater environments, rinse the drone thoroughly with fresh water.
• Wipe the drone dry with a soft cloth. Ensure all ports and connectors are free of moisture before charging or storing.
• Clean the camera lens with a microfiber cloth.

5.2 भंडारण

• ड्रोन और बैटरी को ठंडी, सूखी जगह पर रखें, सीधी धूप और अत्यधिक तापमान से दूर रखें।
• For long-term storage, discharge batteries to approximately 50-60% capacity.
• Remove propellers if storing in a compact case.

5.3 बैटरी केयर

• बैटरी को ओवरचार्ज या ओवर डिस्चार्ज न करें।
• If a battery appears swollen or damaged, discontinue use immediately and dispose of it properly.
• Avoid puncturing or exposing batteries to extreme heat.

6। समस्या निवारण

7. विनिर्देश

8. वारंटी और समर्थन

For warranty information, please refer to the warranty card included with your product or visit the official SwellPro website. For technical support, troubleshooting assistance, or spare parts, please contact SwellPro customer service.

SwellPro Official Webसाइट: www.swellpro.com

अमेज़न स्टोर: Visit the SwellPRO Store on Amazon