Cudy LT300 4G LTE वाई-फाई राउटर उपयोगकर्ता मैनुअल

1 परिचय

The Cudy LT300 is a 4G LTE Wi-Fi Router designed to provide high-speed internet access using a cellular SIM card. It supports LTE download speeds of up to 150 Mbps and Wi-Fi speeds of up to 300 Mbps. This manual provides instructions for setting up, configuring, and maintaining your LT300 router.

2. पैकेज सामग्री

कृपया पैकेज की सामग्री को ध्यानपूर्वक जांच लें। यदि कोई वस्तु गायब है या क्षतिग्रस्त है, तो अपने विक्रेता से संपर्क करें।

• Cudy LT300 4G LTE Wi-Fi Router
• बिजली अनुकूलक
• ईथरनेट केबल
• Detachable LTE Antennas (x2)
• SIM Card Adapters (Nano to Micro, Nano to Standard)
• त्वरित स्थापना गाइड

3. उत्पाद खत्मview

3.1. हार्डवेयर घटक

Familiarize yourself with the ports, buttons, and LED indicators on your Cudy LT300 router.

चित्र 1: सामने view of the Cudy LT300 router, showing the power, Wi-Fi, LTE signal, and LAN/WAN LED indicators.

• सत्ता का नेतृत्व किया: बिजली की स्थिति को इंगित करता है.
• वाई-फाई एलईडी: वाई-फाई की स्थिति दर्शाता है।
• LTE Signal LEDs: Indicate 4G LTE signal strength.
• LAN/WAN LEDs: Indicate Ethernet port activity.

चित्र 2: पिछला view of the Cudy LT300 router, displaying the power port, LAN/WAN ports, SIM card slot, and WPS/Reset button.

• पावर पोर्ट: शामिल पावर एडाप्टर को कनेक्ट करें.
• LAN/WAN Ports: Gigabit Ethernet ports for wired connections. One port can function as WAN for wired internet.
• सिम कार्ड स्लॉट: Insert your 4G LTE SIM card here.
• WPS/रीसेट बटन: Press for WPS function. Press and hold for 5-8 seconds to factory reset.
• एंटीना कनेक्टर्स: Connect the detachable LTE antennas.

4. सेटअप

4.1. Install LTE Antennas

Screw the two detachable LTE antennas into the connectors on the rear panel of the router. Ensure they are securely tightened and oriented vertically for optimal signal reception.

4.2. सिम कार्ड डालें

The Cudy LT300 uses a standard-sized SIM card. If your SIM card is Nano or Micro, use the provided SIM card adapters to fit it into the standard slot.

1. सुनिश्चित करें कि राउटर बंद है।
2. पीछे के पैनल पर सिम कार्ड स्लॉट का पता लगाएं।
3. Insert the SIM card into the slot with the metal contacts facing down and the notched corner oriented correctly, as indicated on the router. Push until it clicks into place.
4. If removing, gently push the SIM card in again until it springs out.

चित्र 3: Illustration of inserting a SIM card into the Cudy LT300 router's SIM card slot.

4.3. पावर ऑन

Connect the power adapter to the router's power port and then plug the other end into a power outlet. The Power LED will illuminate, and the router will begin to boot up. This process may take approximately 30-60 seconds.

5. कॉन्फ़िगरेशन

5.1. एक्सेस करना Web प्रबंधन इंटरफ़ेस

To configure your router, you need to access its webआधारित प्रबंधन इंटरफ़ेस।

1. Connect your computer to the router via Wi-Fi (SSID and password are on the label at the bottom of the router) or an Ethernet cable.
2. एक खोलो web ब्राउज़र (जैसे, क्रोम, फ़ायरफ़ॉक्स, एज)।
3. डिफ़ॉल्ट IP पता टाइप करें 192.168.10.1 एड्रेस बार में और एंटर दबाएं।
4. Enter the default login credentials. The default username is व्यवस्थापक और डिफ़ॉल्ट पासवर्ड है व्यवस्थापक (or as printed on the router label).
5. Follow the on-screen instructions for the initial setup wizard, if prompted. It is recommended to change the default login password for security.

5.2. Basic Wi-Fi Settings

Navigate to the "Wireless" or "Wi-Fi Settings" section in the web interface to customize your wireless network.

• एसएसआईडी (नेटवर्क नाम): Change the default Wi-Fi network name to a unique name.
• Password (Security Key): Set a strong, secure password for your Wi-Fi network. WPA2-PSK AES is recommended.
• सुरक्षा मोड: Select WPA2-PSK.

5.3. LTE/Internet Settings

The router should automatically detect your SIM card and configure the LTE connection. If not, you may need to manually configure the APN (Access Point Name) settings provided by your mobile operator.

1. Go to the "Network" or "LTE Settings" section.
2. Check the connection status. If "Disconnected" or "Limited," verify APN settings.
3. Select "Manual" APN configuration if automatic fails and enter the correct APN, username, and password from your mobile operator.
4. Save changes and reboot the router if prompted.

5.4. VoLTE Configuration

The Cudy LT300 supports VoLTE functionality. If your SIM card and mobile operator support VoLTE, you may find settings under "Voice" or "VoLTE" in the web interface to enable or configure this feature. Consult your mobile operator for specific VoLTE settings if required.

6. संचालन

6.1. कनेक्टिंग डिवाइस

• वाईफ़ाई: On your device (smartphone, tablet, laptop), search for the Wi-Fi network name (SSID) you configured and enter the Wi-Fi password.
• ईथरनेट: Connect an Ethernet cable from a LAN port on the router to the Ethernet port on your computer or other wired device.

6.2. एलईडी संकेतक

Monitor the LED indicators on the front panel to understand the router's status:

• सत्ता का नेतृत्व किया: Solid Green (On), Off (Off).
• वाई-फाई एलईडी: Solid Green (Wi-Fi On), Blinking (Data Transfer), Off (Wi-Fi Off).
• LTE Signal LEDs: Indicate signal strength (e.g., 3 bars for strong, 1 bar for weak).
• LAN/WAN LEDs: Solid Green (Connected), Blinking (Data Transfer), Off (No Connection).

7. रखरखाव

7.1. फर्मवेयर अपडेट

Regularly check for and install firmware updates to ensure optimal performance and security. Firmware files can usually be downloaded from the Cudy official webसाइट।

1. नवीनतम फर्मवेयर डाउनलोड करें file for your LT300 model.
2. तक पहुंच web प्रबंधन इंटरफ़ेस.
3. Navigate to "System Tools" or "Firmware Upgrade."
4. डाउनलोड किया गया फ़र्मवेयर अपलोड करें file and follow the on-screen instructions. Do not power off the router during the upgrade process.

7.2. फैक्टरी रीसेट

A factory reset will restore the router to its default settings. This can be useful for troubleshooting or if you forget your login password.

• With the router powered on, press and hold the WPS/Reset button on the rear panel for 5-8 seconds until the LEDs flash.
• बटन छोड़ दें। राउटर फ़ैक्टरी डिफ़ॉल्ट सेटिंग्स के साथ रीबूट हो जाएगा।

8। समस्या निवारण

• कोई इंटरनेट कनेक्शन नहीं:
  • Check if the SIM card is inserted correctly and activated.
  • Verify LTE signal strength via the LED indicators.
  • Ensure APN settings are correct in the web इंटरफ़ेस.
  • Reboot the router and your connected devices.
• उप्योग नहीं कर सकते Web प्रबंधन इंटरफ़ेस:
  • सुनिश्चित करें कि आपका डिवाइस राउटर के वाई-फाई या ईथरनेट के माध्यम से जुड़ा हुआ है।
  • Verify the IP address 192.168.10.1 is typed correctly.
  • कोई दूसरा प्रयास करें web ब्राउज़र.
  • Perform a factory reset if you forgot the login password.
• धीमी वाई-फाई स्पीड:
  • Check LTE signal strength; a weak signal will affect overall speed.
  • Ensure the router is placed in a central location, away from obstructions and interference.
  • कनेक्टेड डिवाइसों या बैंडविड्थ-गहन गतिविधियों की संख्या कम करें।
  • Consider changing the Wi-Fi channel in the web इंटरफ़ेस.

9. विनिर्देश

10. सुरक्षा जानकारी

• Do not expose the device to water or humidity.
• डिवाइस को स्वयं अलग करने या मरम्मत करने का प्रयास न करें।
• केवल उपलब्ध पावर एडाप्टर का ही उपयोग करें।
• डिवाइस को गर्मी स्रोतों और सीधी धूप से दूर रखें।
• डिवाइस के चारों ओर उचित वेंटिलेशन सुनिश्चित करें।

11. वारंटी और समर्थन

For warranty information and technical support, please refer to the warranty card included in the package or visit the official Cudy website. Support resources typically include FAQs, firmware downloads, and contact information.