1 परिचय
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. उत्पाद सुविधाएँ
- यूनिवर्सल संगतता: Controls a wide range of devices.
- Self-Learning Function: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- बड़े बटन: Designed with oversized, clearly marked buttons for enhanced usability.
- सहज ज्ञान युक्त डिजाइन: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. सेटअप
3.1. बैटरी स्थापना
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- रिमोट कंट्रोल के पीछे बैटरी कम्पार्टमेंट कवर का पता लगाएँ।
- Slide the cover downwards or press the latch and lift to open.
- दो AAA बैटरियां डालें, यह सुनिश्चित करते हुए कि धनात्मक (+) और ऋणात्मक (-) टर्मिनल डिब्बे के अंदर के चिह्नों के साथ सही ढंग से संरेखित हों।
- बैटरी कम्पार्टमेंट कवर को वापस अपनी जगह पर तब तक खिसकाएं जब तक कि वह सुरक्षित रूप से क्लिक न करने लगे।
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- लर्निंग मोड दर्ज करें: दबाकर रखें शक्ति button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- सिग्नल प्रेषित करें: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- अन्य बटनों के लिए दोहराएँ: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- लर्निंग मोड से बाहर निकलें: सभी वांछित बटन प्रोग्राम हो जाने के बाद, बटन दबाएँ। शक्ति button on the Simply remote again to exit learning mode. The indicator light will turn off.
टिप्पणी: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
छवि: सामने view of the Simply SUPTLB001 remote control.
4. संचालन निर्देश
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- उपकरण चयन: दबाओ A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- बिजली चालू/बंद: दबाओ शक्ति चयनित डिवाइस को चालू या बंद करने के लिए बटन दबाएं.
- ध्वनि नियंत्रण: उपयोग V+ आवाज बढ़ाने के लिए बटन और V- वॉल्यूम कम करने के लिए.
- Program/Channel Control: उपयोग P+ button to go to the next program/channel and P- to go to the previous program/channel.
- ए वी इनपुट: दबाओ AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. रखरखाव
- सफाई: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- बैटरी प्रतिस्थापन: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- भंडारण: रिमोट को सूखी जगह पर, सीधी धूप और अत्यधिक तापमान से दूर रखें।
6। समस्या निवारण
| संकट | संभावित कारण | समाधान |
|---|---|---|
| रिमोट काम नहीं करता। | बैटरियां ख़त्म हो गई हैं या गलत तरीके से लगाई गई हैं। | सही ध्रुवता सुनिश्चित करते हुए बैटरियों को नई AAA बैटरियों से बदलें। |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| दूरस्थ क्षेत्रों की रेंज खराब है। | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. विनिर्देश
| ब्रांड | सुपीरियर इलेक्ट्रॉनिक्स |
| मॉडल नाम | केवल |
| मॉडल संख्या | SUPTLB001 |
| रंग | काला |
| कनेक्टिविटी प्रौद्योगिकी | Infrared (IR) Learning Function |
| संगत डिवाइस | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| बटनों की संख्या | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| बैटरी प्रकार | 2 x AAA (not rechargeable) |
| अधिकतम सीमा | 10 मीटर (लगभग 33 फीट) |
| आयाम (लगभग) | 16.5 सेमी (लंबाई) x 4.5 सेमी (चौड़ाई) |
छवि: साइड view of the remote control with approximate dimensions.
8. वारंटी और समर्थन
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 साल खरीद की तारीख से.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webकृपया वारंटी सत्यापन के लिए अपनी खरीद का प्रमाण संभाल कर रखें।
