1 परिचय
The Intermec PM43 is a mid-range industrial label printer designed for reliable performance and ease of use. This printer supports both direct thermal and thermal transfer printing methods, making it versatile for various labeling applications. It features a user-friendly interface, available with either a color touch-screen or universal icons, to simplify operation and reduce training requirements. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PM43 printer.
चित्र 1: सामने view of the Intermec PM43 printer, showing the control panel and media output slot.
2. सेटअप
2.1 अनपैकिंग और प्लेसमेंट
Carefully remove the printer from its packaging. Ensure all packing materials are removed. Place the printer on a stable, flat surface with adequate space around it for ventilation and access to ports and media loading areas.
2.2 बिजली जोड़ना
- Ensure the printer's power switch is in the OFF (O) position.
- Connect the power cord to the printer's AC inlet.
- पावर कॉर्ड के दूसरे सिरे को ग्राउंडेड इलेक्ट्रिकल आउटलेट में प्लग करें।
2.3 होस्ट सिस्टम से कनेक्ट करना
The PM43 printer supports USB and Ethernet connectivity.
- यूएसबी कनेक्शन: Connect a USB cable from the printer's USB port to an available USB port on your computer.
- ईथरनेट कनेक्शन: प्रिंटर के ईथरनेट पोर्ट से अपने नेटवर्क राउटर या स्विच तक एक ईथरनेट केबल कनेक्ट करें।
Figure 2: Rear panel of the PM43 printer, illustrating the power inlet, power switch, USB ports, and Ethernet port.
2.4 मीडिया लोड हो रहा है
The PM43 printer can use various media types, including labels, tags, and continuous media. For thermal transfer printing, a ribbon is also required.
- प्रिंटर का मीडिया कवर खोलें।
- Place the roll of labels onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
- Thread the media through the guides and under the printhead assembly.
- If using thermal transfer, load the ribbon onto the ribbon supply spindle and thread it according to the internal diagrams.
- मीडिया कवर बंद करो।
चित्र 3: आंतरिक view of the PM43 printer, highlighting the media and ribbon loading mechanisms.
3. संचालन निर्देश
3.1 पॉवर चालू/बंद करना
- To power on, flip the power switch on the rear panel to the ON (I) position. The printer will perform a self-test.
- To power off, flip the power switch to the OFF (O) position.
3.2 बेसिक प्रिंटिंग
Once the printer is connected and media is loaded, you can send print jobs from your host system. Ensure the correct printer drivers are installed on your computer.
- वह दस्तावेज़ या एप्लिकेशन खोलें जिससे आप प्रिंट करना चाहते हैं।
- Select the Intermec PM43 printer from the print dialog.
- Adjust print settings (e.g., label size, print density) as needed.
- प्रिंट प्रक्रिया शुरू करें।
3.3 Using the User Interface
The PM43 features either a color touch-screen or a universal-icon interface for direct control and configuration. Navigate through menus to adjust settings such as media calibration, network configuration, and printer status.
4. रखरखाव
4.1 प्रिंटहेड की सफाई
Regular cleaning of the printhead is crucial for maintaining print quality and extending the printhead's lifespan. Use a lint-free cloth or a printhead cleaning pen with isopropyl alcohol.
- Power off the printer and disconnect the power cord.
- मीडिया कवर खोलें।
- Gently wipe the printhead element from the center outwards.
- Allow the printhead to dry completely before closing the cover and powering on the printer.
4.2 Replacing Media and Ribbon
Replace media rolls and thermal transfer ribbons as they run out. Refer to section 2.4 for loading instructions. Always ensure the correct media and ribbon types are used for optimal performance.
5। समस्या निवारण
This section addresses common issues you might encounter with your PM43 printer.
5.1 खराब प्रिंट गुणवत्ता
- Faded or incomplete print: Clean the printhead (see section 4.1). Ensure the ribbon (if thermal transfer) is correctly loaded and not depleted. Adjust print density settings.
- Smudged print: Verify media type is compatible. Ensure printhead pressure is correctly set.
5.2 Media Jams
- प्रिंटर को पावर ऑफ करें।
- Open the media cover and carefully remove any jammed media.
- Ensure media is loaded correctly and guides are properly adjusted.
- Close the cover and power on.
5.3 कनेक्टिविटी समस्याएँ
- Printer not detected: Check all cable connections (USB/Ethernet). Restart the printer and host system. Verify driver installation.
- नेटवर्क संबंधी समस्याएं: Confirm network cable is connected. Check network settings on the printer and host system.
6. विनिर्देश
The following table outlines the key technical specifications for the Intermec PM43 printer.
| विशेषता | विनिर्देश |
|---|---|
| मॉडल नाम | पीएम43 |
| मुद्रण प्रौद्योगिकी | प्रत्यक्ष तापीय / तापीय स्थानांतरण |
| प्रिंट रंग | मोनोक्रोम (काला) |
| अधिकतम मुद्रण गति | 12 इंच प्रति सेकंड |
| अधिकतम प्रिंट रिज़ॉल्यूशन | 203 डीपीआई |
| समर्थित मीडिया प्रकार | Black Mark, Continuous Label, Fanfold, Gap, Label, Linered Label, Linerless, Notch, Roll Fed, Tag |
| अधिकतम मीडिया आकार | 4 x 6 इंच |
| कनेक्टिविटी | USB, ईथरनेट |
| याद | 128 एमबी |
| नियंत्रण विधि | Touch-screen or Universal-icon interface |
| उत्पाद आयाम | 25 x 18 x 16 इंच |
| आइटम का वजन | 1 पाउंड |
| शक्ति का स्रोत | एसी आपूर्ति |
| Language Emulation | DSim, Fingerprint, IPL, XML |
Figure 4: Regulatory and compliance labels found on the Intermec PM43 printer.
7. वारंटी जानकारी
The Intermec PM43 printer is covered by a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec support webसाइट।
8. समर्थन
For further assistance, technical support, or to download the latest drivers and firmware, please visit the official Intermec support website or contact your authorized Intermec dealer. Ensure you have your printer's model number (PM43A01000000201) and serial number available when seeking support.
