सैमसंग DC68–02291A VRT मैनुअल के साथ फ्रंट लोड वॉशर
विनिर्देशन
उत्पाद का नाम |
Samsung DC68–02291A Front Load Washer with VRT |
मॉडल संख्या |
DC68–02291A |
लोड प्रकार |
आगे का भार |
VRT Technology |
हाँ |
क्षमता |
4.5 घन फीट |
धोने के चक्रों की संख्या |
10 |
विकल्पों की संख्या |
9 |
Maximum Spin Speed |
1200 RPM |
एनर्जी स्टार प्रमाणित |
हाँ |
आयाम (डब्ल्यू एच xx डी) |
27 "x 38.7" x 33 " |
पूछे जाने वाले प्रश्न
To clean the washer drum, you can run a Self Clean cycle. This cycle removes dirt and bacteria from the drum.
The Delay End feature allows you to set a time for the washer to finish its cycle. Press the Delay End button repeatedly until the desired delay time is shown on the display.
The Add Garment feature allows you to add more clothes to the washer after the cycle has started. Press the Start/Pause button to pause the cycle, then open the door and add the garment. Close the door and press the Start/Pause button again to resume the cycle.
The Quick Wash cycle is used for lightly soiled clothes that need to be washed quickly. Press the Quick Wash button and select the desired wash temperature and spin speed.
The Smart Care feature allows you to diagnose and troubleshoot problems with your washer using your smartphone. Download the Samsung Smart Washer app and follow the instructions to use Smart Care.
The Child Lock feature locks the washer’s buttons to prevent children from accidentally starting or changing a cycle. Press and hold the Temp and Spin buttons simultaneously for three seconds to activate or deactivate Child Lock.
To clean the detergent dispenser, remove it from the washer and rinse it under running water. Use a soft brush to remove any remaining detergent residue.
The Steam Wash cycle is used for heavily soiled clothes that need deep cleaning. Press the Steam button and select the desired wash temperature and spin speed.
The Eco Bubble feature creates bubbles that penetrate clothes faster and more evenly, resulting in a more thorough wash. Press the Eco Bubble button to activate this feature.
The Spin Only cycle is used to spin excess water from clothes. Press the Spin button and select the desired spin speed.