To get started with your CANNY Smart Button, please ensure you have a CANNY Interface installed to the vehicle, and that channels have been assigned to the CANNY outputs. For more information on how to install CANNY, please click or scan the QR code. When installing a smart button for the first time, it is recommended to ensure the CANNY.LZR app is updated to the latest version.
CLICK (Single Press):
To toggle a function off and back on, once it has been activated by the vehicle CAN bus.
HOLD (>1 Sec):
To override a vehicle function, e.g. a driving light synced with the vehicle high beam, but that can instead be turned on independently. (Note: operation would reset once an on/off condition is received through the CAN bus).
DOUBLE-CLICK:
Used to temporarily disable the assigned function, e.g. a driving light synced with the vehicle high beam, can be disabled independently of the vehicle high beam. (Note: operation would reset after another double-click, or the CAN bus restarts after being inactive.)
स्टेप 1।
From the Output Select Page, click the menu option in the top-right corner.
उपयोगकर्ता गाइड
स्टेप 2।
Click ‘Smart Buttons’. (Note: it may be required to perform a firmware update – 2.1.0 or above required.)
स्टेप 3।
Click ‘Start Searching’. Follow the on-screen instructions.
स्टेप 4।
Click the ⋮ icon to access the Smart Button menu.
स्टेप 5।
Click ‘Configure Smart Button’.
स्टेप 6।
बटन को किसी विशिष्ट (पूर्व-निर्धारित) फ़ंक्शन को असाइन करें.
नए यंत्र जैसी सेटिंग
Required if a Smart Button has previously been paired with a different CANNY – complete the steps below for a Battery Change, but within 5secs of re-installing the battery, press and hold the button for 10secs.
बैटरी कैसे बदलें
With the Smart Button held on a surface, twist the button anti-clockwise. Remove the old battery and replace with a new CR2032 battery (‘+’ side facing up). Reattach the top part of the Smart Button by twisting clockwise.
अतिरिक्त सहायता
ईमेल: technical@lazerlampएस.कॉम
फ़ोन: +44 (0)1992 677374
अक्सर पूछे जाने वाले प्रश्नों
प्रश्न: मैं स्मार्ट बटन को फ़ैक्टरी सेटिंग्स पर कैसे रीसेट करूं?
A: To perform a factory reset, follow these steps: 1. Access the Smart Button menu. 2. Select 'Factory Reset' option. 3. Confirm the reset action when prompted.
प्रश्न: यदि मेरा स्मार्ट बटन प्रतिक्रिया नहीं दे रहा है तो मुझे क्या करना चाहिए?
A: If your Smart Button is not responding, try replacing the battery first. If the issue persists, contact our technical support for assistance.
दस्तावेज़ / संसाधन
 |
लेज़र कैनी स्मार्ट बटन [पीडीएफ] उपयोगकर्ता गाइड कैनी, कैनी स्मार्ट बटन, स्मार्ट बटन, बटन |